Titanium because of its high strength, corrosion resistance, and high heat resistance have been widely used in various fields. Many countries recognize the importance of titanium alloy materials, have their research and development, and has been applied.
2014年12月31日星期三
Urbanization leveraging domestic titanium dioxide market is expected to pick up
SMM News: Third Plenary Session of eighteen comprehensive deepening reform and made strategic plan, put forward the strong support of the new urbanization and so on. Many people in the industry said that urbanization is expected to leveraging domestic titanium dioxide market rebound.
For a long time, China has been in the field of application of titanium dioxide coatings, plastics and paper industry mainly three, which accounted for more than 60% of the paint industry. Weak demand for medical titanium plate dioxide market this year, continuing weakness, even in the "Golden September and Silver October," the traditional peak season for a "busy season" phenomenon.
China Coating Industry Association, Branch Secretary Guo Xinrong titanium dioxide industry today to the great wisdom news agency said urbanization will give China titanium dioxide industry, large enterprises to provide an unprecedented opportunity.
Industry pundits had pointed out that the country promoting the new urbanization
construction and long-term policy for the long-term prosperity and development of titanium dioxide industry to provide a strong support.
Billions have recently said that after the Third Plenary Session of China-eighth, the economic reform measures next year will gradually be implemented at the end of the two sessions, the national real estate regulation will also make greater use of market-based instruments, as well as China's urbanization affordable housing construction will also stimulate rapid and accelerating growth of domestic titanium sheet metal dioxide market.
"Real estate is an important consumer market, paint products, and urbanization will promote the real estate, infrastructure construction and renovation." Social business analyst Yang Xun told dioxide great wisdom, Chinese titanium dioxide is mainly used in the coatings industry, with accelerate the urbanization process, titanium dioxide industry will usher in a new development opportunities.
At present, the majority of mainstream offer domestic sulfuric acid rutile and anatase titanium dioxide in 13200-14500 yuan / ton and 11300-12500 yuan / ton (all taxes included).
Close to the end of November, the price of titanium welding wire dioxide market temporarily stabilized.According to the Shanghai Securities News newspaper reported that cities and towns will be completed before the end of the working meeting was held to choose.
2014年12月25日星期四
Titanium dioxide industry standards to improve access to corporate mergers and acquisitions will accelerate
SMM News: Great Wisdom AAStocks Newswires November 13 hearing, China Coating Industry Association, Branch Secretary Guo Xinrong titanium dioxide industry on the 12th on the "titanium dioxide industry access" (revised edition) annotation and explanation, saying " access "concept by" threshold type "binding regulatory function to enhance the" screening "type guide the evaluation function. Analysis of the industry, after the access conditions improve, will promote the pace of corporate mergers and acquisitions titanium wire manufacturers dioxide.
China Coating Industry Association, SUN Lian-ying for great wisdom agency reports, the current Chinese titanium dioxide is facing many problems, there are still a lot of product structure unreasonable, companies should be how to transition, how restructuring efforts.
** Industry issues highlighted structural surplus, enterprises operating and profit situation is not optimistic **
It is reported that at present China has more than 50 manufacturers of titanium dioxide, are distributed throughout the country, including a large number of small and medium enterprises focused on the lack of resources in the eastern region. And our resources are mainly concentrated in the perovskite Southwest, the nation's largest manufacturer of titanium sheet suppliers dioxide, Sichuan Lomon current production capacity is only 300,000 tons, 100,000 tons more than the domestic producers of titanium dioxide is only nine, the whole industry is still in a relatively decentralized development period.
China Coating Industry Association branch chairman 谢湘云 titanium dioxide industry, said at the meeting that this year, the slow growth of domestic demand for titanium dioxide, titanium dioxide production capacity continues to grow, a larger increase in imports, the structural problem of excess increasingly prominent; Meanwhile, titanium dioxide Overall prices in the down channel, the current price of titanium dioxide compared with earlier this year has fallen by 15%.
In addition, the domestic titanium dioxide enterprises operating conditions and profitability are not optimistic. Xiexiang Yun said, according to statistics, this year the domestic titanium dioxide enterprises operating rate of about 66% capacity utilization rate of 95% titanium business, slag enterprises operating rate of about 35 percent, this year there are more than 20% of earnings, other titanium dioxide enterprises are operating very difficult.
On the other hand, titanium dioxide industry is also facing increasingly severe environmental problems. "With the exposure of titanium dioxide pollution incidents, environmental policy tightening is expected to become more intense, more and more efforts to stop production for rectification, the adjustment of industrial structure upgrading is increasing." Well, general manager of the supermarket pigment Shanghai Cai Xu Bo said, " to the capacity is expected to achieve a certain degree. "
** Titanium mergers will accelerate the pace of restructuring **
It is reported that, "the titanium shaft dioxide industry access conditions" during the "Eleventh Five-Year" in order to "control the increment, optimize inventory," as the leading national industrial policy system titanium dioxide, an important part of the management and control policy.
Guo Xinrong said titanium dioxide industry is associated with the terms of the "titanium dioxide industry access" in "access" concept gives the height of new policies and requirements that enhance the "barriers to entry" restricted property "normative standard" adjustment of operational guidance and regulations.
In response, industry analysts believe that this will further promote domestic titanium dioxide pace of corporate mergers and acquisitions.
"According to the experience of other countries, titanium dioxide industry mergers and acquisitions is the trend towards centralization in the next 5 to 10 years, mergers and acquisitions dioxide enterprises will become more frequent, domestic bound to occur 3 to 5 more than 300,000 tons titanium dioxide business. "Cai Xu Bo said," our titanium dioxide business is business model from extensive to intensive, intensive manufacturing operations paradigm shift. "
He is expected, with environmental upgrades, titanium dioxide industry and the US and Europe is bound to go through the same process of production, increase the proportion of the birth of industry upgrading chlorination, industry concentration increase, leading enterprises have the right to speak to gradually appear.
Deng Jie Beijing Oriental Horizon Technology Development Co., Ltd., general manager also held the same view. In his view, from the formal point of view, there is potential for 15-20 furniture manufacturers will gradually formed; and from the scale, will give rise to the leading multinational and Chinese industrial cluster shape, size and form of titanium dioxide chloride process more than 100,000 tons production.
2014年12月21日星期日
China Titanium Association expects substantial growth in demand for short-term is difficult
SMM News: Great Wisdom AAStocks Newswires November 12 hearing, China has become the world's largest titanium producer and consumer countries, and China Coating Industry Association branch chairman Xie Xiangyun titanium dioxide industry is expected on the 12th, in the short term China Titanium demand will not grow larger.
In recent years, the domestic market, titanium pipe price dioxide, titanium dioxide, a significant slowdown in the growth rate of apparent demand trend. Supermarkets General Manager of good pigment Shanghai Cai Xu Bo said that 2013 years of the GDP growth rate has been below 8 percent, sluggish domestic demand for titanium dioxide.
Figure 1: 2008-2012 dioxide apparent demand for our
Cai Xu Bo said that, overall, the domestic titanium dioxide production growth slowing down, in 2012 the national production of 1.89 million tons of titanium dioxide, an increase of 4 percent in 2011, growth is slowing down; and from January to September 2013 by the prices down dragged down by sluggish sales, capacity utilization declined, the actual production of titanium dioxide by about 1.2 million tons.
Figure 2: 2003-2013 domestic titanium tube supplier dioxide production statistics (2013 annual production is estimated at about 1.8 million tons)
Xiexiang Yun said, according to the statistical analysis of the relevant marketing agency, this titanium dioxide business operating rate of about 66% capacity utilization rate of 95% titanium business, slag business started around 35%, this year there are more than 20% of earnings, the Other titanium dioxide business enterprises are very difficult.
"The central government's new term economic roadmap see steady growth, structural adjustment, to the way the main tone of China's economic development in the future and in the coming years." Xie Xiangyun that the next government will reduce the size of loans, land targets, production quantities can administrative and other direct interventions, and the main use of monetary, fiscal and other means of improving macroeconomic total. While the focus on adjusting the focus of market regulation, reducing the industry into the pre-examination and approval, to enhance the quality, safety, environmental protection, energy, technology and other aspects of the standard first-line supervision.
"The aim is to deepen market-oriented reforms had to build an upgraded version of the Chinese economy, and therefore impossible to have a massive investment stimulus policies." Xiexiang Yun said, "Titanium demand is expected in the short term there will be a big increase."
Great Wisdom news agency in the 12th by the China Coating Industry Association of titanium dioxide industry branch sponsored the "2013 China titanium alloy plate dioxide industry will be" informed the above information.
In recent years, the domestic market, titanium pipe price dioxide, titanium dioxide, a significant slowdown in the growth rate of apparent demand trend. Supermarkets General Manager of good pigment Shanghai Cai Xu Bo said that 2013 years of the GDP growth rate has been below 8 percent, sluggish domestic demand for titanium dioxide.
Figure 1: 2008-2012 dioxide apparent demand for our
Cai Xu Bo said that, overall, the domestic titanium dioxide production growth slowing down, in 2012 the national production of 1.89 million tons of titanium dioxide, an increase of 4 percent in 2011, growth is slowing down; and from January to September 2013 by the prices down dragged down by sluggish sales, capacity utilization declined, the actual production of titanium dioxide by about 1.2 million tons.
Figure 2: 2003-2013 domestic titanium tube supplier dioxide production statistics (2013 annual production is estimated at about 1.8 million tons)
Xiexiang Yun said, according to the statistical analysis of the relevant marketing agency, this titanium dioxide business operating rate of about 66% capacity utilization rate of 95% titanium business, slag business started around 35%, this year there are more than 20% of earnings, the Other titanium dioxide business enterprises are very difficult.
"The central government's new term economic roadmap see steady growth, structural adjustment, to the way the main tone of China's economic development in the future and in the coming years." Xie Xiangyun that the next government will reduce the size of loans, land targets, production quantities can administrative and other direct interventions, and the main use of monetary, fiscal and other means of improving macroeconomic total. While the focus on adjusting the focus of market regulation, reducing the industry into the pre-examination and approval, to enhance the quality, safety, environmental protection, energy, technology and other aspects of the standard first-line supervision.
"The aim is to deepen market-oriented reforms had to build an upgraded version of the Chinese economy, and therefore impossible to have a massive investment stimulus policies." Xiexiang Yun said, "Titanium demand is expected in the short term there will be a big increase."
Great Wisdom news agency in the 12th by the China Coating Industry Association of titanium dioxide industry branch sponsored the "2013 China titanium alloy plate dioxide industry will be" informed the above information.
2014年12月17日星期三
Titanium bar supplier
Accuracy, conditions and proper cutting parameters
The tool axial and radial runout accuracy is also important. For example, if the blade is not correctly installed in the cutter, the cutter around the cutting edge will quickly damage. When cutting titanium bar for sale, a number of other factors, such as poor tool manufacturing tolerances, wear and tool damage, the handle has a defective or poor quality, spindle wear, etc., will largely affect the tool life. Observations show that in all cases the processing underperforming, 80% are caused by these factors. Although most people prefer the positive geometry tool, but in fact slightly negative rake angle geometry of the tool can be removed with higher feed materials and feed per tooth of up to 0.5mm. But this also means that you must maintain optimal steady state, that the machine should be very strong, and the fixture should be extremely stable.
In addition to the Plunge milling (preferably circular blade) outside, you should try to avoid using 90 main angle, this usually helps to improve the stability and overall performance obtained, when used in shallow depths cut especially in the case, in When deep cavity milling, a recommended practice is to use the tool connected to the handle variable-length tool, rather than using a single length of the long knives in the whole process.
Adjustment of the cutting parameters to overcome lower vibration due to the amount of feed per tooth caused by traditional solution, but this method is not appropriate because it would have catastrophic cutting tool life and influence. Indexable insert cutting edges require a certain amount of rounding to increase the cutting edge strength and better coating adhesion.
When milling titanium bars, at least to the minimum required for tool feed amount of work - usually each tooth 0.1mm. If you throw vibration trend, the blade is damaged or shorten tool life issues will be inevitable. Possible solutions include accurate calculation of the amount of feed per tooth, and make sure it is at least 0.1mm.
It may also be lower spindle speed, in order to achieve the initial feed rate. If you use the smallest amount of feed per tooth, and the spindle speed is not correct, then the impact on the tool life can be as high as 95%. Lower spindle speed usually improves tool life.
Once established stable condition, can be a corresponding increase in spindle speed and feed rate to get the best performance. Another approach is to remove some of the blade from the cutter blade or select containing less cutter.
The tool axial and radial runout accuracy is also important. For example, if the blade is not correctly installed in the cutter, the cutter around the cutting edge will quickly damage. When cutting titanium bar for sale, a number of other factors, such as poor tool manufacturing tolerances, wear and tool damage, the handle has a defective or poor quality, spindle wear, etc., will largely affect the tool life. Observations show that in all cases the processing underperforming, 80% are caused by these factors. Although most people prefer the positive geometry tool, but in fact slightly negative rake angle geometry of the tool can be removed with higher feed materials and feed per tooth of up to 0.5mm. But this also means that you must maintain optimal steady state, that the machine should be very strong, and the fixture should be extremely stable.
In addition to the Plunge milling (preferably circular blade) outside, you should try to avoid using 90 main angle, this usually helps to improve the stability and overall performance obtained, when used in shallow depths cut especially in the case, in When deep cavity milling, a recommended practice is to use the tool connected to the handle variable-length tool, rather than using a single length of the long knives in the whole process.
Adjustment of the cutting parameters to overcome lower vibration due to the amount of feed per tooth caused by traditional solution, but this method is not appropriate because it would have catastrophic cutting tool life and influence. Indexable insert cutting edges require a certain amount of rounding to increase the cutting edge strength and better coating adhesion.
When milling titanium bars, at least to the minimum required for tool feed amount of work - usually each tooth 0.1mm. If you throw vibration trend, the blade is damaged or shorten tool life issues will be inevitable. Possible solutions include accurate calculation of the amount of feed per tooth, and make sure it is at least 0.1mm.
It may also be lower spindle speed, in order to achieve the initial feed rate. If you use the smallest amount of feed per tooth, and the spindle speed is not correct, then the impact on the tool life can be as high as 95%. Lower spindle speed usually improves tool life.
Once established stable condition, can be a corresponding increase in spindle speed and feed rate to get the best performance. Another approach is to remove some of the blade from the cutter blade or select containing less cutter.
2014年12月14日星期日
Titanium pipe in water purification Role
The main characteristics of titanium tubes for desalination:
Density, specific strength (strength / specific gravity) is high density metallic titanium 4.51g / cm3, higher than Al and less than steel, copper, nickel. The intensity ratio of the first metal but is located, is a stainless steel three times, 1.3 times the aluminum alloy;
Good corrosion resistance ) Titanium is a very reactive metal, which is very low equilibrium potential, thermodynamic corrosion tendency in the medium is large. But in fact the titanium is very stable in many media, such as titanium alloy plate in an oxidizing, neutral or weakly reducing medium such as corrosion resistant. This is because the titanium and has a great affinity for oxygen, air or oxygen-containing medium, the titanium surface layer of dense, strong adhesion, large inert oxide film to protect the titanium substrate corrosion. Even due to mechanical wear and tear will heal or regenerate quickly. This shows that titanium is a metal with a strong passive tendencies. Medium temperature below 315 ℃ titanium oxide film 3 is always kept this characteristic, a good heat transfer performance of metallic medical titanium plate, although lower than the thermal conductivity of carbon steel and copper, but the titanium excellent in corrosion resistance, so the wall thickness can be greatly thinned , and the surface of the heat exchanger and steam condensation droplets way, reducing the thermal group, so the surface is not scaling may also reduce the thermal resistance of titanium so that the heat transfer performance improved significantly
4 good heat resistance
The new long-term use titanium spring wire or higher temperature 600 ℃.
Good chemical resistance, low temperature performance as the representative of cryogenic titanium alloy, its strength with decreasing temperature increase, but the plastic change is not large.
Tensile yield strength of its performance close to that of titanium shows its yield ratio (tensile / yield strength) high, indicating that the titanium material difference in molding plastic deformation. Since the ratio of the yield limit of the titanium and the elastic modulus is large, so that resiliency titanium molding large.
Density, specific strength (strength / specific gravity) is high density metallic titanium 4.51g / cm3, higher than Al and less than steel, copper, nickel. The intensity ratio of the first metal but is located, is a stainless steel three times, 1.3 times the aluminum alloy;
Good corrosion resistance ) Titanium is a very reactive metal, which is very low equilibrium potential, thermodynamic corrosion tendency in the medium is large. But in fact the titanium is very stable in many media, such as titanium alloy plate in an oxidizing, neutral or weakly reducing medium such as corrosion resistant. This is because the titanium and has a great affinity for oxygen, air or oxygen-containing medium, the titanium surface layer of dense, strong adhesion, large inert oxide film to protect the titanium substrate corrosion. Even due to mechanical wear and tear will heal or regenerate quickly. This shows that titanium is a metal with a strong passive tendencies. Medium temperature below 315 ℃ titanium oxide film 3 is always kept this characteristic, a good heat transfer performance of metallic medical titanium plate, although lower than the thermal conductivity of carbon steel and copper, but the titanium excellent in corrosion resistance, so the wall thickness can be greatly thinned , and the surface of the heat exchanger and steam condensation droplets way, reducing the thermal group, so the surface is not scaling may also reduce the thermal resistance of titanium so that the heat transfer performance improved significantly
4 good heat resistance
The new long-term use titanium spring wire or higher temperature 600 ℃.
Good chemical resistance, low temperature performance as the representative of cryogenic titanium alloy, its strength with decreasing temperature increase, but the plastic change is not large.
Tensile yield strength of its performance close to that of titanium shows its yield ratio (tensile / yield strength) high, indicating that the titanium material difference in molding plastic deformation. Since the ratio of the yield limit of the titanium and the elastic modulus is large, so that resiliency titanium molding large.
2014年12月10日星期三
Titanium and titanium alloy materials in medical applications introduced
As a new titanium metal material, is to support cutting-edge scientific and technological progress of important raw materials, is the economic development and industrial upgrading of basic industries. A focus on producing large quantities of medical surgical implants method for manufacturing high-precision titanium and titanium alloy bars, especially in diameter h8-h7 tolerance levels between 3-3.5m length within the range of, placed on the working platform does not allow a gap medical precision titanium and titanium alloy rod manufacturing method, wherein, for the implementation of a method of manufacturing:
a) blank preparation, selected in line with titanium or titanium alloy ingot GB / T13810-2007 standard requirements as blank:
b) Forging of blanks for Forging, forged grinding, deburring and crack
Surface defects; forging deformation rate of 50-65%, pure titanium billet heating temperature of 950-1050 ℃, titanium materialHeating temperature alloy billets of 1000-1200 ℃, holding time is calculated after the heating temperature reached by the following formula:
D / 2 + 30 - 50 minutes (where D is the diameter of the ingot rod, in mm)
c) deformation processing, re-forging of the blank, followed by grinding, and finally rolling, forging deformation rate of 50-65%, pure titanium billet heating temperature of 850-1000 ℃, titanium billet heating temperature of 1000 -1150 ℃, the heating temperature is calculated to achieve the holding time after step (b) with the same formula.
d) heat, bars made of after step (c) for the recrystallization annealing, eliminate stress axis machining and grain structure formation, in which titanium rods annealing temperature 650-700 ℃, annealed titanium plates for sale rod temperature of 800-850 ℃, holding time to reach the heating temperature after step (b) is calculated with the same;
e) finishing on bars for drawing return first round, and then make oblique roll straightener straightening conduct cutting head, and finally polished; the heating temperature is 500-600 ℃, cut head and oblique roller leveler straightener straightening rods at both ends of the head is a defective part after straightening cut off;
f) inspection of the finished product tolerance levels, surface finish, surface quality inspection.
a) blank preparation, selected in line with titanium or titanium alloy ingot GB / T13810-2007 standard requirements as blank:
b) Forging of blanks for Forging, forged grinding, deburring and crack
Surface defects; forging deformation rate of 50-65%, pure titanium billet heating temperature of 950-1050 ℃, titanium materialHeating temperature alloy billets of 1000-1200 ℃, holding time is calculated after the heating temperature reached by the following formula:
D / 2 + 30 - 50 minutes (where D is the diameter of the ingot rod, in mm)
c) deformation processing, re-forging of the blank, followed by grinding, and finally rolling, forging deformation rate of 50-65%, pure titanium billet heating temperature of 850-1000 ℃, titanium billet heating temperature of 1000 -1150 ℃, the heating temperature is calculated to achieve the holding time after step (b) with the same formula.
d) heat, bars made of after step (c) for the recrystallization annealing, eliminate stress axis machining and grain structure formation, in which titanium rods annealing temperature 650-700 ℃, annealed titanium plates for sale rod temperature of 800-850 ℃, holding time to reach the heating temperature after step (b) is calculated with the same;
e) finishing on bars for drawing return first round, and then make oblique roll straightener straightening conduct cutting head, and finally polished; the heating temperature is 500-600 ℃, cut head and oblique roller leveler straightener straightening rods at both ends of the head is a defective part after straightening cut off;
f) inspection of the finished product tolerance levels, surface finish, surface quality inspection.
2014年12月6日星期六
The difference between titanium and titanium alloy plates
Titanium is a refractory metal of a light metal, a density of 4.5 g / cm3, 57% only of iron. Strength titanium alloy with high strength comparable to steel, but also has good heat resistance and low temperature performance, long-term work at certain alloy between 450 ℃ ~ 550 ℃ and minus 250 ℃. Titanium has good salt tolerance classes, the ability to seawater and nitric acid corrosion, Ti-30M alloy is resistant to high concentrations of hydrochloric acid and sulfuric acid corrosion. These advantages of titanium, grade 2 titanium wire deserved to be called a "space" metal, "Ocean" and the following metal steel, aluminum metal after the third and so on.
Titanium and titanium alloy material at room temperature forming plant, due to the forming force, a small amount of deformation limit and great resilience, which gave the manufacturing process brings a lot of difficulties, especially resilient, so that the hand injury the entire amount of labor large batch production can not meet the requirements.
The hot press forming is generally used in the manufacture of seamless titanium tube metal pieces and effective process methods, this method can be at room temperature (or heated state F) molded item, reheat Shaping: pull the materials can be directly used to form a heat and Hot school shape. Whether it is hot forming and heat were collapsed to form the school principle creep and relaxation of effort.
Thermoforming mainly take advantage of the softening and creep properties of the material in a heated state, and to improve the plastic to reduce and improve the molding forming force than to avoid cracking, but also reduce some rebound. Thermal Shaping mainly using the principle of stress relaxation in the heated state, in order to eliminate the springback, solve the problem of the precision of the parts due to the problems caused by springback.
In order to understand the mechanism of heat and hot forming shaped school must master creep and stress relaxation of principle. Month away, but this rationale Mrs perish only the right to development, but more with ten design chemical, atomic, gas and gas turbine boil, supersonic aircraft, spacecraft and other buildings of the structure of the product.
Titanium and its alloys as popular as the reason for the absence of aluminum, mainly due to high prices. To reduce costs, the new process for anyone conducting research abroad titanium alloys, such as electrolysis and direct reduction method, once the breakthrough will significantly decrease the cost of titanium sponge, will greatly stimulate the development of titanium grade 2 industry, we can only trace of such studies , can ensure China's titanium industry invincible. Besides the lack of significant capital investment in the processing of titanium and its alloys and titanium forming technology processing technology and applications, thus limiting the vigorous development of titanium industry.
Titanium and titanium alloy material at room temperature forming plant, due to the forming force, a small amount of deformation limit and great resilience, which gave the manufacturing process brings a lot of difficulties, especially resilient, so that the hand injury the entire amount of labor large batch production can not meet the requirements.
The hot press forming is generally used in the manufacture of seamless titanium tube metal pieces and effective process methods, this method can be at room temperature (or heated state F) molded item, reheat Shaping: pull the materials can be directly used to form a heat and Hot school shape. Whether it is hot forming and heat were collapsed to form the school principle creep and relaxation of effort.
Thermoforming mainly take advantage of the softening and creep properties of the material in a heated state, and to improve the plastic to reduce and improve the molding forming force than to avoid cracking, but also reduce some rebound. Thermal Shaping mainly using the principle of stress relaxation in the heated state, in order to eliminate the springback, solve the problem of the precision of the parts due to the problems caused by springback.
In order to understand the mechanism of heat and hot forming shaped school must master creep and stress relaxation of principle. Month away, but this rationale Mrs perish only the right to development, but more with ten design chemical, atomic, gas and gas turbine boil, supersonic aircraft, spacecraft and other buildings of the structure of the product.
Titanium and its alloys as popular as the reason for the absence of aluminum, mainly due to high prices. To reduce costs, the new process for anyone conducting research abroad titanium alloys, such as electrolysis and direct reduction method, once the breakthrough will significantly decrease the cost of titanium sponge, will greatly stimulate the development of titanium grade 2 industry, we can only trace of such studies , can ensure China's titanium industry invincible. Besides the lack of significant capital investment in the processing of titanium and its alloys and titanium forming technology processing technology and applications, thus limiting the vigorous development of titanium industry.
2014年12月2日星期二
Application material titanium and titanium alloys in medical titanium implants
Titanium is a chemically active element, which is easy to form a protective surface oxide film is a dense, this layer of oxide is insoluble, can effectively prevent corrosion of the metal continues. Titanium unlike other metals, it has several features:
- Low density of only 4.5g / cm3;
- Low thermal conductivity 22w / mk (low thermal conductivity);
- Good bearing capacity;
- High stability, alloying can improve performance;
- Outstanding corrosion resistance, and appropriate application of the general media and biological stability.
Titanium and grade 2 titanium alloy implants in medicine began in 1969, was mainly used to repair teeth. After 40 years of research and development, titanium has become one of the most widely used material in the oral implant disciplines, and titanium-based materials are also other tissues and organs in the human body is used instead.
After implantation, several replacement parts to be used in conjunction with the body's adjustment. By adjusting the shape of the implant surface to achieve engagement with the bone surface of the implant, the desired effect can be achieved in a few years. In the General Assembly of the International Association for Dental Research 86th session held recently, the Swedish researchers spoke of a "nano-structures", it is more than a hundred times smaller Canadian coins. Organizations can use this alternative can be achieved in four weeks after implantation of good bone and dental implants combined effect of substance.
By adjusting the size and position of the implant surface nano-organization, not only patients receive faster, more reliable treatment, but also to help people on the human body - implants transfer order in understanding the future of implant surface further study provides guidance.
Titanium dental denture block
This product is mainly used in surgical implants, dental implants, clever use of the characteristics of thin titanium sheet: namely, high affinity human contact without any side effects, is the best of the human implant material.
Implementation of standards GB / T 13810-2007 surgical implants of titanium and titanium alloy ASTM F136 for surgical implant Ti-6Al-4VElI (ELI) (R56401) processing materials for surgical implants ASTM F1108 Ti- 6Al-4V (UNS R56406) Castings ASTM F620 for surgical implant α + β titanium alloy forgings ASTM F67 surgical implants titanium processing material ASTM F1295 surgical implant titanium alloy Ti-6Al-7Nb (UNS R56700) processing ASTM F1341 material for surgical implant titanium wire ASTM F1472 surgical implants Ti-6Al-4V (UNS R56400) processing materials .
- Low density of only 4.5g / cm3;
- Low thermal conductivity 22w / mk (low thermal conductivity);
- Good bearing capacity;
- High stability, alloying can improve performance;
- Outstanding corrosion resistance, and appropriate application of the general media and biological stability.
Titanium and grade 2 titanium alloy implants in medicine began in 1969, was mainly used to repair teeth. After 40 years of research and development, titanium has become one of the most widely used material in the oral implant disciplines, and titanium-based materials are also other tissues and organs in the human body is used instead.
After implantation, several replacement parts to be used in conjunction with the body's adjustment. By adjusting the shape of the implant surface to achieve engagement with the bone surface of the implant, the desired effect can be achieved in a few years. In the General Assembly of the International Association for Dental Research 86th session held recently, the Swedish researchers spoke of a "nano-structures", it is more than a hundred times smaller Canadian coins. Organizations can use this alternative can be achieved in four weeks after implantation of good bone and dental implants combined effect of substance.
By adjusting the size and position of the implant surface nano-organization, not only patients receive faster, more reliable treatment, but also to help people on the human body - implants transfer order in understanding the future of implant surface further study provides guidance.
Titanium dental denture block
This product is mainly used in surgical implants, dental implants, clever use of the characteristics of thin titanium sheet: namely, high affinity human contact without any side effects, is the best of the human implant material.
Implementation of standards GB / T 13810-2007 surgical implants of titanium and titanium alloy ASTM F136 for surgical implant Ti-6Al-4VElI (ELI) (R56401) processing materials for surgical implants ASTM F1108 Ti- 6Al-4V (UNS R56406) Castings ASTM F620 for surgical implant α + β titanium alloy forgings ASTM F67 surgical implants titanium processing material ASTM F1295 surgical implant titanium alloy Ti-6Al-7Nb (UNS R56700) processing ASTM F1341 material for surgical implant titanium wire ASTM F1472 surgical implants Ti-6Al-4V (UNS R56400) processing materials .
2014年10月26日星期日
Titanium and titanium alloy plate creep and stress relaxation
Titanium and titanium alloy plate at room temperature plant forming, shaping force due to the small amount of deformation limit and great resilience, which gave the manufacturing process brings a lot of difficulties,titanium standard parts especially in spring, so that the entire amount of labor hand injury large, can not meet the requirements of the batch.
The hot press forming is generally used for manufacturing titanium metal components and effective process for this method can be the first at room temperature (or heated state F) molded item,medical grade titanium alloy reheat Shaping: plate material can be directly used to form a heat and hot school shape. Whether it is hot forming and heat were collapsed to form the school principle and effort creep relaxation.
Thermoforming mainly take advantage of the creep properties of the material softens in the heated state,titanium rod and the plastic to increase to reduce the forming force than avoiding cracking and improving the molding can also reduce the number of spring. Thermal Shaping is is the use of the principle of stress relaxation in the heated state,Titanium bars in order to eliminate the springback, solve the problem of the precision of the parts due to the problems caused by springback.
The hot press forming is generally used for manufacturing titanium metal components and effective process for this method can be the first at room temperature (or heated state F) molded item,medical grade titanium alloy reheat Shaping: plate material can be directly used to form a heat and hot school shape. Whether it is hot forming and heat were collapsed to form the school principle and effort creep relaxation.
Thermoforming mainly take advantage of the creep properties of the material softens in the heated state,titanium rod and the plastic to increase to reduce the forming force than avoiding cracking and improving the molding can also reduce the number of spring. Thermal Shaping is is the use of the principle of stress relaxation in the heated state,Titanium bars in order to eliminate the springback, solve the problem of the precision of the parts due to the problems caused by springback.
Titanium and titanium alloy plate creep and stress relaxation
Titanium and titanium alloy plate at room temperature plant forming, shaping force due to the small amount of deformation limit and great resilience, which gave the manufacturing process brings a lot of difficulties,titanium standard parts especially in spring, so that the entire amount of labor hand injury large, can not meet the requirements of the batch.
The hot press forming is generally used for manufacturing titanium metal components and effective process for this method can be the first at room temperature (or heated state F) molded item,medical grade titanium alloy reheat Shaping: plate material can be directly used to form a heat and hot school shape. Whether it is hot forming and heat were collapsed to form the school principle and effort creep relaxation.
Thermoforming mainly take advantage of the creep properties of the material softens in the heated state,titanium rod and the plastic to increase to reduce the forming force than avoiding cracking and improving the molding can also reduce the number of spring. Thermal Shaping is is the use of the principle of stress relaxation in the heated state,Titanium bars in order to eliminate the springback, solve the problem of the precision of the parts due to the problems caused by springback.
The hot press forming is generally used for manufacturing titanium metal components and effective process for this method can be the first at room temperature (or heated state F) molded item,medical grade titanium alloy reheat Shaping: plate material can be directly used to form a heat and hot school shape. Whether it is hot forming and heat were collapsed to form the school principle and effort creep relaxation.
Thermoforming mainly take advantage of the creep properties of the material softens in the heated state,titanium rod and the plastic to increase to reduce the forming force than avoiding cracking and improving the molding can also reduce the number of spring. Thermal Shaping is is the use of the principle of stress relaxation in the heated state,Titanium bars in order to eliminate the springback, solve the problem of the precision of the parts due to the problems caused by springback.
2014年10月25日星期六
titanium whole distributor Beneficial properties and research in the field of titanium tubes
Because titanium tube in aviation, aerospace application of achievements, but also attracted dedicated and imaginative world's scientists and engineers handsome,surgical implant titanium prompting them through discussions and meetings, such as symposia, technical titanium whole distributor exchange meetings, international conferences etc.grade 3 titanium to exchange information and to develop further plans. Undoubtedly, the nature of its research titanium tube new application areas is certainly beneficial.
It is clear that the titanium tubes in the energy and industrial applications thanks to the aviation,seamless titanium pipe aerospace industry has been achieved. So, in the future they are also in those areas can support each other it Conversion welded titanium tube or exchange of information which can be considered from two aspects of the future development of the titanium tube industry and technology.
It is clear that the titanium tubes in the energy and industrial applications thanks to the aviation,seamless titanium pipe aerospace industry has been achieved. So, in the future they are also in those areas can support each other it Conversion welded titanium tube or exchange of information which can be considered from two aspects of the future development of the titanium tube industry and technology.
2014年10月19日星期日
Titanium oxide Basics Introduction - barium titanate
Titanium whole distributor describes barium titanate crystal has characteristics such that: when it is under pressure to change the shape, it will produce a current of a power will change shape.titanium wire Thus, it is placed in an ultrasonic barium titanate, which will produce a current pressure, the size of the current generated by it can detect the intensity of the ultrasound. On the contrary,grade titanium 1 a high frequency current through it, it can generate ultrasonic waves. Now, almost all of the ultrasonic instrument, to be used in barium titanate. In addition, there are many applications of barium titanate. For example: railway workers put it on the tracks below, to measure the pressure of the train through time; doctors use it made of pulse recorder. Barium titanate do with underwater detectors,nickel rod underwater eye is sharp, it is not only able to see the fish, but also you can see the reefs, icebergs and enemy submarines under the water and so on.
2014年10月10日星期五
titanium bar filter Cautions
1, to avoid collision scratch, dust and oil.
2, in the use of its working pressure medical titanium bar should not exceed the rated working pressure.
3, during normal use, at least the low start time of 3-5 minutes, the pressure should be controlled relative to 0.5Mpa or less, and then the pressure was gradually adjusted to the normal work of the work needed (not more than the maximum pressure 0.4Mpa).
4 ', titanium bar filters work after a certain period of operation, may be due to clogging of the filter element,titanium bars resulting in increased pressure to reduce the flow, you need to recoil or backwash regeneration.
2, in the use of its working pressure medical titanium bar should not exceed the rated working pressure.
3, during normal use, at least the low start time of 3-5 minutes, the pressure should be controlled relative to 0.5Mpa or less, and then the pressure was gradually adjusted to the normal work of the work needed (not more than the maximum pressure 0.4Mpa).
4 ', titanium bar filters work after a certain period of operation, may be due to clogging of the filter element,titanium bars resulting in increased pressure to reduce the flow, you need to recoil or backwash regeneration.
2014年9月27日星期六
Titanium feature
Titanium whole distributor tells you Titanium features
The two most useful properties of Titanium, seamless titanium pipe the corrosion resistance, the highest intensity and metal - weight ratio. In the non-alloyed state, the strength of titanium steel with some similar, but 45% lighter. There are two allotropes and five natural isotopes from Ti to Ti, which is the highest abundance of Ti (73.8%). The physical properties and chemical properties of zirconium and titanium are similar,Titanium bars this is because the same number of valence electrons of the two, and belong to the same family in the periodic table.
The two most useful properties of Titanium, seamless titanium pipe the corrosion resistance, the highest intensity and metal - weight ratio. In the non-alloyed state, the strength of titanium steel with some similar, but 45% lighter. There are two allotropes and five natural isotopes from Ti to Ti, which is the highest abundance of Ti (73.8%). The physical properties and chemical properties of zirconium and titanium are similar,Titanium bars this is because the same number of valence electrons of the two, and belong to the same family in the periodic table.
2014年9月25日星期四
titanium alloy plate technical requirements
chemical composition of titanium alloy plate shall comply with the provisions of GB / T 3620.1, and when the demand side reinspection,medical titanium plate tolerance chemical composition shall comply with the provisions of GB / T 3620.2's. titanium alloy plate thickness tolerances shall comply with the provisions of Table one. Allow titanium alloy plate width and length of the deviation shall comply with the provisions of Table II. titanium alloy plate in the corners should be cut at right angles.titanium plate suppliers cut diagonally allowed deviation should not exceed the length and width of the sheet.
2014年9月20日星期六
titanium alloy plate and stainless steel plate What is the difference
If the titanium alloy plate shows only one kind of chemical elements from titanium composition. Titanium is very light.titanium foil for sale Commonly used in aviation. Medicine. And corrosion-resistant. So the value is more expensive.
Stainless steel is cheaper. Uses are more extensive. Why not rust stainless steel, adding more than 12.5% of chromium in iron and steel-related. Corruption and incompetence in the oxidative corrosion medium, chromium steel surface can quickly generate a dense layer of passivation film to prevent metal matrix is destroyed. When the chromium content above 12.5% ??when forming a dense layer of stable passivation film, rust resistance occurs leap forward in consolidation, the ability to greatly enhance corrosion resistance,titanium standard parts which is why the amount of chromium-containing stainless steels have a 12% For the above reasons.
Commonly used stainless steel 304 chemical elements for 1Cr18Ni9Ti which one seems to refer to the carbon content. Cr18 refers to the content of chromium. Ni9 refers to the nickel content is what you said above Ti titanium titanium alloy plate of the.
Stainless steel is cheaper. Uses are more extensive. Why not rust stainless steel, adding more than 12.5% of chromium in iron and steel-related. Corruption and incompetence in the oxidative corrosion medium, chromium steel surface can quickly generate a dense layer of passivation film to prevent metal matrix is destroyed. When the chromium content above 12.5% ??when forming a dense layer of stable passivation film, rust resistance occurs leap forward in consolidation, the ability to greatly enhance corrosion resistance,titanium standard parts which is why the amount of chromium-containing stainless steels have a 12% For the above reasons.
Commonly used stainless steel 304 chemical elements for 1Cr18Ni9Ti which one seems to refer to the carbon content. Cr18 refers to the content of chromium. Ni9 refers to the nickel content is what you said above Ti titanium titanium alloy plate of the.
2014年9月18日星期四
titanium bar stockist technical requirements
1: Chemical composition of titanium and titanium bar should be consistent with GB / T 3620.1, provisions,titanium plate suppliers takes repeated experience, the chemical composition tolerances shall comply with the provisions of GB / T 3620.2's.
2: Thermal processing of rod diameter or side length and tolerances shall comply with the provisions of Table A of.
3: After thermal processing by car (mill) light bar and cold-rolled, cold drawn rod diameter tolerances surgical implant titanium shall comply with the provisions of Table II.
4: After thermal processing by car (mill) roundness light bars should not half its size tolerance.
5: Do not cut lengths processing state bar of 300-6000mm, annealed state bar is not definite length of 300-2000mm,titanium foil for sale length or double length should not cut lengths within the scope of the cut length tolerance of + 20mm. ; double length of the incision should be included in the amount of bars, each volume is 5mm incision length or double length should be specified in the contract.
2: Thermal processing of rod diameter or side length and tolerances shall comply with the provisions of Table A of.
3: After thermal processing by car (mill) light bar and cold-rolled, cold drawn rod diameter tolerances surgical implant titanium shall comply with the provisions of Table II.
4: After thermal processing by car (mill) roundness light bars should not half its size tolerance.
5: Do not cut lengths processing state bar of 300-6000mm, annealed state bar is not definite length of 300-2000mm,titanium foil for sale length or double length should not cut lengths within the scope of the cut length tolerance of + 20mm. ; double length of the incision should be included in the amount of bars, each volume is 5mm incision length or double length should be specified in the contract.
2014年9月12日星期五
Welding technology research titanium alloy plate and stainless steel mesh diffusion
diffusion welding titanium alloy plate and stainless steel mesh using solid phase diffusion welding technology.titanium foil for sale Solid-phase diffusion bonding is lower than the melting temperature of the substrate by a certain pressure, so that the material surface contact each other to achieve the local plastic deformation in close contact and form a metallurgical connection process by diffusion and surface bond between atoms.titanium foil for sale This method does not cause macroscopic deformation of parts, melting or relative movement. Available with or without supporting material diffusion between + two mating surfaces.
2014年9月1日星期一
Stone is always engaged in the processing titanium tube stock
Stone is always engaged in the processing of private enterprise , general manager of titanium Baoji City, Shaanxi Province , in June this year, he came to discuss business matters Zunyi Titanium plant at night in Caigen restaurant for dinner , titanium plate for sale I accidentally knew he has a deep and titanium Love .
Forty-six year -old stone overall , looks very lean and capable spirit . He has experienced four car accident, serious bodily injury , arms , feet , thighs, Jingbo multiple fractures have occurred . He said he had been able to walk around today , and can drive to the country to discuss business, thanks to its titanium support from the new life , let him walk freely and enjoy the fun of a new life . Know I was collecting material for their writing , "said titanium Big Pan " to introduce the knowledge of titanium , stone aggregate is also quite proud to tell me , I saw his outstretched right arm to roll up their sleeves that you see here on my arm titanium bone . Its the same to Baoji, Shaanxi Baoji Titanium Technology Co., Ltd. Gao Lin , general manager adds, titanium body very stony total , titanium sheet metal there are titanium plates , titanium screws, titanium bone , etc., also said that the stone is always the biggest beneficiaries of titanium person .
After listening to rock aggregate bond forged titanium , titanium makes me feel incredible. Although titanium is the biological parent metal , I still suspect and must be " titanium" and more on the body no good ! Unexpectedly Stone always said , all right, I'm no different with the previous freedom of movement . The total line when farewell stone back to Xi'an , according to the etiquette we shake hands with another , did not think his hand is so there is grip , which I regarded as " titanium" convinced , also felt the titanium to the crazy world of men brought endless madness charm.
2014年8月29日星期五
If experience makes stone titanium rod stock
If experience makes stone and titanium total surprise , then, that 29 -year-old British teacher Gavin Rees and titanium that is really thrilling experience , shattering titanium madness.
According to the British "Sunday Mail" reported , titanium plate for sale Gavin Rees in a near-fatal skiing accident sustained severe head , facial bones and skull fractures and unrecognizable because even friends can not even recognize . Fortunately, the doctor for his purposes facial bone reconstruction surgery - with up to 21 " Titanium Skull" substitute its skull defect , and then to 131 screws tight to be fixed in order to eventually get rid of the death of his miraculously . Allegedly, 70% of head and now Gavin is composed of titanium , the metal content of his head than any other person in the world !
Talking about that crazy skiing accident , titanium sheet metal Gavin Rees recalled: "I facial bones are squeezed back , the whole head is deformed and friends have all been frightened , saying that they have been completely unable to recognize me . My injury is a mess , blood all over the place . friends will I wrapped in blankets , while singing to keep me awake while waiting for rescue personnel arrived . "
Happy is 19 hours of surgery to put " titanium head ," Gavin Rees has replaced the guy 's nose shape , people also become beautiful .
It is reported that doctors decided to rebuild destroyed Gavin Rees facial bone structure with titanium . As the face completely deformed , according to the doctor had Gavin passport photos as a guide to rebuild his facial structure . medical titanium plate Interestingly, when informed that his facial bones should be replaced when titanium - Gavin require doctors to carry small change his appearance , put his nose made of titanium alloy handsome George Clooney looks like.
2014年8月26日星期二
the metal content of Gavin titanium plate
Doctors said that because of the metal content of Gavin Rees head than any man in the world , from students to their nickname "Golden headman " - sometimes friends curiously tapping his head , they also really titanium sheet metal will be issued clanking metal sound of it !
The above two cases associated with the titanium living textbook tells us that titanium is indeed a good thing, called the body regenerate bone. Men in this world juggling , crazy, looking for adventure stimulation, can not be avoided in the awesome scenery infinite probability , relatively woman, a man in distress is much larger than the crazy woman . We do not advocate the men go crazy adventure, but we want to bless a man of adventure , medical grade titanium ready for their first 207 good human bones , " titanium" , which is " titanium titanium are " on the man's care.
In the green grass, when you see men holding up play to do with titanium golf club to hit a ball , you will find a combination of titanium and man is so perfect , the mighty , the moment when the ball hit fly , you will feeling of titanium and titanium crazy man in the world opened the prelude - to show the beauty of masculine men titanium combined .
2014年8月23日星期六
Titanium and chromium alloys can do plate titanium
Titanium and chromium alloys can do
Titanium : one has a very high melting point of silver light metal element, atomic number 22 , is usually hard and brittle at low temperatures , heating malleable , ductile titanium , normal temperature with good corrosion resistance , medical titanium plate mainly in the form of ilmenite steel and the manufacture of other alloys used as structural materials for [titanium] - element symbols Ti
Chromium : A blue and white polyvalent metallic element , atomic number 24 , usually prepared chrome , hard and brittle , corrosion state exists only in compounds . Mainly in the form of chromite ore , aluminum thermal method , silicon thermal or electrolytic method to separate it out from the ore , mainly used in alloys ( such as for ferrochrome alloy or nickel-chromium alloy resistance of chromium steels ) and electroplating medical grade titanium alloy ( such as automotive shock absorbers and interior decoration as well as cutting tools ) [chromium] - element symbols Cr. Titanium and alloys of chromium may be , are corrosion-resistant metals.
Titanium- aluminum -chromium alloy
α + β type titanium alloy . The main alloy TC5 and TC6, TC7, TC8 and so on. Aluminum and chromium from solid solution strengthening effect, and can stabilize β phase . Also often added to improve the thermal stability of molybdenum and lasting strength , adding a small amount of iron, silicon or zirconium in order to improve heat resistance . Vacuum consumable arc melting ingot- pressure processing to become useful again . buy titanium sheet Such alloys due to poor ductility, good thermal stability, not broad industrial applications , where TC5 has largely been eliminated.
2014年8月21日星期四
Liquefaction titanium supplies titanium plate for sale
Liquefaction titanium supplies what those functions do ? Research by the Japanese , it is a total of eight kinds of functions , 1. Ease pain. 2 . Effective in preventing fatigue. 3 . Muscles soften , it will ease muscle stiffness, medical titanium plate prevention of sports injuries. 4 . Increased muscle activity , can improve motor function . 5. Dispersion of red blood cells in the blood becomes better, and the blood flowing smoothly , the cycle better. 6. Increase the quality of sleep . 7 . Smooth body and mind . 8. No side effects can prevent cold physical effects . The main reason for the above 8:00 is also facing a long season , strength , endurance being tested to prevent sports injuries in professional baseball players use a series
The human body has a weak current flowing . From the brain to the body , from the body to the brain information communicated by all current flow. If a person is no trouble, no pain , when fully healthy , his body current is orderly flowing in the body . But, in fact , perfectly healthy person is extremely rare , particularly in the modern world , the long-term internal pressure in computers and other electrical products and electromagnetic waves emitted under the impact of factors outside of the body current confusion in fact most of them have state. The result often leads to fatigue, muscle stiffness, medical grade titanium alloy aches and other symptoms or problems.
If we can sort out the chaos of the current body and make it stable and orderly nature of the current flow in the body , the muscles will not only soft , even the blood circulation also become good, and thus make telangiectasia, and promote metabolism, body movements and therefore smooth.
Titanium has a special current characteristics of the human body will produce beneficial physiological effects and its chemical stability, and will not produce the change or deterioration. Titanium beneficial to humans , and quite safe , very fit body . Because titanium products will settle the current body , relieve muscle tension state, therefore, the spirit will get loose , will gradually relax the muscles , titanium plates and improve athletic performance.
2014年8月20日星期三
gradually spread to the country titanium rod stock
About titanium jewelry
This year the popular baseball players titanium tube stock on the rush DAI Qi titanium necklace , almost the majority of the players are hanging around the neck , as well as people wear wrist or knee . According to the players said that after wearing titanium necklace , claiming to eliminate fatigue , to maintain good physical help performance race. The so-called titanium collar spread from Japan , Taiwan, Japan Bucai baseball players have worn hanging . Titanium can be made collar , bracelet , wrist , waist and knee pads and other various products , this product trend has gradually spread to the country !
Titanium collar can not just jewelry, it is the product of the latest technology , " liquefaction titanium" made of titanium and liquefaction technology , it is in Japan in 1995 through nanotechnology , public transport interchanges and other pure titanium wire technology that will not dissolve in water , rigid molecules dissolve liquefaction titanium success , combining fiber and other related substances into various products, including titanium necklace , titanium bracelet , titanium emulsion , titanium belts, shirts and other kinds of titanium Ŧ . Because liquefaction titanium special charge characteristics , with ease of electrical and electromagnetic effects , and the human cell membrane also has micro-current , wear -related products , enabling blood activation of heme iron , especially modern , occupying a variety of household appliances , mobile phones under various microwave radiation and pressure , easily allowing the body to produce positive and negative current confusion , grade 2 titanium wire coupled with the incorrect movement , often leads to phenomena such as muscle aches , and liquefaction titanium micro-current is adjusted so that the body action smoother, more comfortable weapon.
2014年8月12日星期二
professional baseball players use a series titanium welding wire
No side effects can prevent cold physical effects . The main reason for the above 8:00 is also facing a long season , strength , endurance being tested to prevent sports injuries in professional baseball players use a series
The human body has a weak current flowing . titanium whole distributor From the brain to the body , from the body to the brain information communicated by all current flow. If a person is no trouble, no pain , when fully healthy , his body current is orderly flowing in the body . But, in fact , perfectly healthy person is extremely rare , particularly in the modern world , the long-term internal pressure in computers and other electrical products and electromagnetic waves emitted under the impact of factors outside of the body current confusion in fact most of them have state. The result often leads to fatigue, muscle stiffness, aches and other symptoms or problems.
If we can sort out the chaos of the current body and make it surgical implant titanium stable and orderly nature of the current flow in the body , the muscles will not only soft , even the blood circulation also become good, and thus make telangiectasia, and promote metabolism, body movements and therefore smooth.
Titanium has a special current characteristics of the human body will produce beneficial physiological effects and its chemical stability, and will not produce the change or deterioration. Titanium beneficial to humans , and quite safe , very fit body . titanium grade 7 bar Because titanium products will settle the current body , relieve muscle tension state, therefore, the spirit will get loose , will gradually relax the muscles , and improve athletic performance.
2014年8月7日星期四
Titanium and titanium alloy pressure casting titanium whole distributor
Pressure Casting Casting for reducing the amount of rough machining, precision casting blank so
close to finished parts forming titanium whole distributor method is the most promising, especially as titanium and titanium
alloys such difficult and expensive metal processing. In the early stages of development of titanium
alloy precision casting someone want to use this method to produce titanium alloy precision
castings, but due to time limitations and conditions of the technical level, so that this idea can
not be achieved. After casting titanium researchers decades of effort, the former Soviet Union in
the study of titanium pressure casting process aspect has solved some problems: in the press to
establish a vacuum device (vacuum casting chamber and vacuum casting chamber); find some possible
type casting and die casting machine for casting a new high-temperature components heat-resistant
material; successful research can ensure that there must superheat and batch ingredients accurately
special metal smelting processes.
Good melting of titanium with a certain degree of superheat liquid by turning the crucible, casting
by pouring cup was sent to the room, under the effect of pressure die-casting rod, casting type
liquid titanium into the cavity from the casting room, die casting good at casting type inner
packing, cooling, and then removed. To eliminate casting surface may produce cold traps, flow marks
or other defects due to cast, surgical implant titanium especially the thin edge. Die-casting should be preceded by the type
of warm-up.
Arc melting is used as a heating source, in addition, a vacuum may also be used in induction
heating, electron beam heating, or the suspension smelting.
Heat-resistant steel casting-type material used in severe erosion by liquid titanium molybdenum or
special places may be inlaid graphite block. Casting chamber die casting machine uses heat-resistant
alloy. Pressing the piston head with a molybdenum alloy or heat-resistant alloy. Type casting
surface roughness should not be less than Ra≈0.6μm, otherwise, it should affect the surface
quality precision castings. titanium sheet To improve the life of the mold and die casting part, a lubricant may be
sprayed on their work surface.
2014年8月6日星期三
Titanium can be made a little more than titanium alloy plate
Production and advantages of titanium bicycle frame
Titanium can be made a little more than 1 light weight and great strength of the frame, can be seen
from the table, the strength of steel, titanium and similar, but the weight is only half of the
steel, a titanium titanium whole distributor alloy frame and therefore the same intensity will be much lighter than steel
frame.
2 Titanium has a very good elasticity, which makes it contributed to the vibration in the absorption
of riding. Produced with titanium frame has a very good comfort, and Titanium is a metal with a
memory, it is almost unlimited service life in their deformation range, that buying a titanium frame
once and for all. Generally, the conditions of use in a professional, aluminum frame 2 years of
life, the steel frame is 8 years, while the titanium frame is about 20 years can be achieved.
3 under normal conditions, medical titanium plate corrosion phenomenon hardly occurs. Lee went back there has its
disadvantages, titanium also has its inevitable shortcomings, at present the biggest headache is one
word: expensive metal content in accordance with, the titanium is actually not rare!. However, the
natural state of titanium element generally exists in the form of titanium dioxide, refining process
complex, technically demanding, and spend time and therefore higher costs. Further welding process
is extremely difficult because of the strong affinity of titanium and oxygen, into a titanium oxide
immediately after contact with air, while the second oxide is hard and brittle, the strength of this
part will continue to decline. Caution must be used an inert gas welding. Tig welding is commonly
referred to: (Tig: tungsten inert gas abbreviation) were tungsten electrode arc welding and argon
gas. Necessary to cut off the titanium sheet air titanium welding is carried out.
2014年8月5日星期二
Marine titanium castings what kind of benefits titanium plate suppliers
Marine titanium castings what kind of benefits
Titanium and titanium alloys titanium alloy plate due to low density, high specific strength, corrosion resistance to sea
water and marine atmosphere, non-magnetic, transparent sound, shock vibration, overall performance
and good processability and titanium alloy plate an ideal marine metal materials, titanium and titanium alloys in ship
the use of the ship greatly extend the life of the equipment.
2014年8月1日星期五
strengthen titanium plate suppliersmanagement titanium bar stockist
Import titanium production and operation of new regulations
In order to combat the smuggling of titanium , titanium production and operation for rectification order to ensure the healthy development of China's titanium industry , the State Economic and Trade Commission , Ministry of Foreign Trade , titanium bar stockist Customs and other seven departments , recently jointly issued "on the strengthening of titanium import management , production and operation to rectify the order of notification . " "Notice" provisions : First, strengthen titanium import management . The titanium , titanium alloy , titanium alloy scrap pieces focus on sensitive goods as imports increase customs inspection efforts. Meanwhile, the focus of the trial price of titanium as customs goods, imports of titanium violations and smuggling cases , and resolutely punished according to law. Strictly implement the relevant provisions of the State " Environmental Control ( 1996 ) No. 204 ," the document is strictly prohibited titanium scrap , scrap titanium alloy , titanium alloy scrap imports on to scrap iron and steel, electrical appliances and other scrap metal imports or entrained in the name of imported titanium units and individuals , once discovered , in accordance with the relevant provisions of the punishment. The titanium, titanium alloy included in the statutory inspection of new product catalog, the State titanium spring wire Administration for Entry for the implementation of the statutory inspection of imported titanium , does not meet the standards prohibit the export of new products . Second, to strengthen titanium processing production management. Enterprises for the production of titanium production license system , unauthorized businesses and individuals are not allowed to production and processing of titanium and its products . Third, rectify market order flow titanium . National acquisitions and sales of titanium metal and titanium , titanium alloy , titanium alloy scrap ( including unwrought titanium , powder , profiles , etc. ) of a unified management . Titanium ventures have been set up after the SETC or its authorized validation, industrial and commercial administrative authorities for re-registration . The new application for the establishment of titanium enterprises approved by the State Economic and Trade Commission or its authorized units , the industry and commerce administration authorities for registration . Without the approval and registration of , any enterprise or individual shall engage in business activities titanium . Recently, the State Administration for Industry and Commerce in conjunction with the quality and technical supervision departments of Baoji , welded titanium tube Shenyang two centralized straighten titanium market , strictly regulate the processing and marketing behavior of titanium products , strengthen quality supervision and related products. Titanium is an emerging high-quality precious metals , widely used in various fields of national defense , cutting-edge technology and the national economy . Our country is one of the few countries in the world able to produce titanium . In recent years, low-grade titanium rampant smuggling in the country , some criminals fraudulent use of China's largest production base of titanium Baoji Titanium Industry Co., Ltd. brand and product certification, shoddy, deceptive , or even selling abroad with chemical pollution , titanium scrap nuclear contamination , not only to use the unit planted a security risk , but also seriously affected the healthy development of China's titanium industry . "Notice" requirement customs , industry and commerce administration , quality and technical supervision departments to actively cooperate to increase efforts to jointly improve the management and marketing of imported titanium rectification work .
, Represents only the views of the author , and Ben Lichangwuguan . Accuracy of Information Network Information Technology Co., Ltd. Shanghai Nonferrous which does not contain or reference , reliability or completeness of any express or implied warranty. For any direct or indirect result of the use , reprint losses resulting from the information provided herein , Shanghai Nonferrous Network Information Technology Co., Ltd. shall not be liable . Media cooperation , please contact info@smm.cn or 021-61831988 turn 5003 .
2014年7月27日星期日
When excessive hydrogen content of titanium tubes titanium whole distributor
Titanium tube is removed by heat treatment method other substances
When excessive hydrogen content of titanium tubes , titanium plate suppliers become brittle leaving notched impact toughness and tensile strength of a sharp decline in the general provisions of the hydrogen content of titanium tubes shall not exceed 0.015% . To reduce the amount of hydrogen absorption , parts should be removed prior to heat treatment fingerprints, rolling mill mark , grease and other residue , no vapor heat treatment furnace atmosphere . If the hydrogen content of titanium tube exceeds the allowable value , must be removed by vacuum annealing . Dehydrogenase is generally vacuum annealing at 538-760 ℃, maintained under a pressure lower than 0.066Pa 2-4h.
When the temperature does not exceed 540 ℃ , the titanium titanium whole distributor oxide film surface of the tube does not significantly thickened , however, the heat treatment at higher temperature (760 ℃ above ) , the oxidation rate is rapidly increased, and the oxygen expansion inside material to form a diffusion layer - contaminated layers. Oxygen contamination layer has a high ratio leads to brittle parts of the surface cracks and damage. Removing contaminated layers of oxygen with mechanical processing methods ( such as room cut , sandblasted , etc. ) , or pickling, chemical milling and other chemical methods , in the heat treatment , the heating time should be guaranteed under the premise of the heat treatment is shortened as much as possible meteorite , but also in performed in a welded titanium tube vacuum furnace or an inert gas (argon , nitrogen, etc. ) furnace . Application of appropriate Xu Min can avoid or reduce contamination titanium tube furnace parts heating in air generated .
2014年7月22日星期二
titanium alloy plate is a new and important structural
Titanium is a new and important structural materials used in the aerospace industry , the proportion between the aluminum and steel , strength and temperature ranged , Medical grade titanium alloy but has high strength and excellent resistance than seawater corrosion and ultra- low temperature performance. In 1950 the United States for the first time in the F-84 fighter-bombers used after the fuselage insulation panels, wind shield , tail cover other non- load-bearing components. 1960s began using parts from titanium alloy fuselage toward the rear of the fuselage , in part, to replace structural steel bulkheads , beams, rails and other important flap bearing components . The amount of titanium in military aircraft is increasing rapidly , reaching 20 % to 25% by weight of the aircraft structure . Since the 1970s , began extensive use of titanium civilian aircraft such as the Boeing 747 aircraft with a capacity of 3640 kg or more of titanium . Aircraft Mach number of less than 2.5 primarily to replace the titanium steel , to reduce structural weight . Again , the U.S. SR-71 high-altitude reconnaissance aircraft speed ( Mach 3 at an altitude of 26,212 meters ) , 93% titanium by weight of the aircraft structure , known as " all-titanium " aircraft . When the weight ratio of aircraft engines, increased from 4-6 to 8-10 , a corresponding outlet temperature from compressor 200 ~ 300 ° C to 500 ~ 600 ° C , medical grade titanium the original plate is made of aluminum and the blades of the low pressure compressor must switch to titanium , or titanium instead of stainless steel plate and high-pressure compressor blades in order to reduce the structural weight . 1970s, the amount of titanium in the general aviation engines accounted for 20% to 30% of the total weight of the structure is mainly used in the manufacture of compressor components such as forged titanium fan, compressor discs and blades, cast titanium compressor casing , intermediate casing, bearing housing and so on. The main advantage of the spacecraft 's high- strength titanium alloy , corrosion resistance and low temperature performance to manufacture all kinds of pressure vessels, fuel tanks , fasteners, instrument straps, architecture and rocket shells. Sputnik , the lunar module , manned spaceship and space shuttles are also using titanium plates welded .
2014年7月16日星期三
titanium whole distributor State Administration for Entry for the implementation
Import titanium production and operation of new regulations
In order to combat the smuggling of titanium , titanium production and operation for rectification order to ensure the healthy development of China's titanium industry , the State Economic and Trade Commission , plate titanium Ministry of Foreign Trade , Customs and other seven departments , recently jointly issued "on the strengthening of titanium import management , production and operation to rectify the order of notification . " "Notice" provisions : First, strengthen titanium import management . The titanium , titanium alloy , titanium alloy scrap pieces focus on sensitive goods as imports increase customs inspection efforts. Meanwhile, the focus of the trial price of titanium as customs goods, imports of titanium violations and smuggling cases , and resolutely punished according to law. Strictly implement the relevant provisions of the State " Environmental Control ( 1996 ) No. 204 ," the document is strictly prohibited titanium scrap , scrap titanium alloy , titanium alloy scrap imports on to scrap iron and steel, electrical appliances and other scrap metal imports or entrained in the name of imported titanium units and individuals , surgical implant titanium once discovered , in accordance with the relevant provisions of the punishment. The titanium, titanium alloy included in the statutory inspection of new product catalog, the State Administration for Entry for the implementation of the statutory inspection of imported titanium , does not meet the standards prohibit the export of new products . Second, to strengthen titanium processing production management. Enterprises for the production of titanium production license system , unauthorized businesses and individuals are not allowed to production and processing of titanium and its products . Third, rectify market order flow titanium . National acquisitions and sales of titanium metal and titanium , titanium alloy , titanium alloy scrap ( including unwrought titanium , powder , profiles , etc. ) of a unified management . Titanium ventures have been set up after the SETC or its authorized validation, industrial and commercial administrative authorities for re-registration . The new application for the establishment of titanium enterprises approved by the State Economic and Trade Commission or its authorized units , the industry and commerce administration authorities for registration . Without the approval and registration of , any enterprise or individual shall engage in business activities titanium . Recently, the State Administration for Industry and Commerce in conjunction with the quality and technical supervision departments of Baoji , Shenyang two centralized straighten titanium market , strictly regulate the processing and marketing behavior of titanium products , titanium standard parts strengthen quality supervision and related products. Titanium is an emerging high-quality precious metals , widely used in various fields of national defense , cutting-edge technology and the national economy . Our country is one of the few countries in the world able to produce titanium . In recent years, low-grade titanium rampant smuggling in the country , some criminals fraudulent use of China's largest production base of titanium Baoji Titanium Industry Co., Ltd. brand and product certification, shoddy, deceptive , or even selling abroad with chemical pollution , titanium scrap nuclear contamination , not only to use the unit planted a security risk , but also seriously affected the healthy development of China's titanium industry . "Notice" requirement customs , industry and commerce administration , quality and technical supervision departments to actively cooperate to increase efforts to jointly improve the management and marketing of imported titanium rectification work .
, Represents only the views of the author , and Ben Lichangwuguan . Accuracy of Information Network Information Technology Co., Ltd. Shanghai Nonferrous which does not contain or reference , reliability or completeness of any express or implied warranty. For any direct or indirect result of the use , reprint losses resulting from the information provided herein , Shanghai Nonferrous Network Information Technology Co., Ltd. titanium sheets for sale shall not be liable . Media cooperation , please contact info@smm.cn or 021-61831988 turn 5003 .
titanium bar stockist no vapor heat treatment furnace atmosphere
Titanium tube is removed by heat treatment method other substances
When excessive hydrogen content of titanium tubes , titanium bar stockist become brittle leaving notched impact toughness and tensile strength of a sharp decline in the general provisions of the hydrogen content of titanium tubes shall not exceed 0.015% . To reduce the amount of hydrogen absorption , parts should be removed prior to heat treatment fingerprints, rolling mill mark , grease and other residue , titanium whole distributor no vapor heat treatment furnace atmosphere . If the hydrogen content of titanium tube exceeds the allowable value , must be removed by vacuum annealing . Dehydrogenase is generally vacuum annealing at 538-760 ℃, maintained under a pressure lower than 0.066Pa 2-4h.
When the temperature does not exceed 540 ℃ , the titanium oxide film surface of the tube does not significantly thickened , however, the heat treatment at higher temperature (760 ℃ above ) , the oxidation rate is rapidly increased, and the oxygen expansion inside material to form a diffusion layer - contaminated layers. Oxygen contamination layer has a high ratio leads to brittle parts of the surface cracks and damage. Removing contaminated layers of oxygen with mechanical processing methods ( such as room cut , sandblasted , etc. ) , or pickling, chemical milling and other chemical methods , in the heat treatment , the heating time should be guaranteed under the premise of the heat treatment is shortened as much as possible meteorite , but also in performed in a vacuum furnace or an inert gas titanium wire manufacturers (argon , nitrogen, etc. ) furnace . Application of appropriate Xu Min can avoid or reduce contamination titanium tube furnace parts heating in air generated .
2014年7月15日星期二
titanium alloy plate Accuracy of Information Network Information Technology
Progress in China's titanium industry technology
This paper introduces the history, titanium plate suppliers current situation and prospect of China's titanium industry technology. Were reviewed from several aspects titanium resources, titanium sponge, titanium processing material, titanium application development, standardization of titanium. Wu Quanxing Northwest Nonferrous Metal Research Institute
, Represents only the views of the author, and Ben Lichangwuguan. Accuracy of Information Network titanium sheets for sale Information Technology Co., Ltd. Shanghai Nonferrous which does not contain or reference, reliability or completeness of any express or implied warranty. For any direct or indirect result of the use, reprint losses resulting from the information provided herein, Shanghai Nonferrous Network Information surgical implant titanium Technology Co., Ltd. shall not be liable. Media cooperation, please contact info@smm.cn or 021-61831988 turn 5003.
2014年7月11日星期五
titanium whole distributor Panzhihua Iron and Titanium with paint giant VALSPAR supply
Panzhihua Iron and Titanium with paint giant VALSPAR supply contract signed R-298
December 14 , Titanium company and the world 's top three paint giant American VALSPAR Group Cooperation Conference was held successfully . This is a company trying to fist Titanium products into the international market, titanium titanium whole distributor dioxide , and international coatings industry giants to undertake a major initiative of cooperation .
American VALSPAR Group's global procurement director dioxide SteveBeckwith, titanium dioxide, Purchasing Director , Asia Pacific Health and Titanium Liu company for future strategic cooperation for the exchange and cooperation between the two sides identified in the general rutile titanium dioxide R-298 product areas .
Titanium VALSPAR Group with the U.S. reached a titanium plate cooperation intention , and signed a supply contract for next year . Titanium VALSPAR Group Company became a stable partner and supplier , which will greatly enhance the Panzhihua titanium industry 's influence in the international arena , as Panzhihua titanium industry and international standards, rapid access to improved product quality and service of each type of information provides a platform
It is understood that universal rutile titanium dioxide R-298 product is Titanium Company successfully developed since 2009 to produce a new generation of products , good whiteness , high gloss , hiding power, good dispersion , titanium rod stock is the only domestic titanium dioxide can emulate the international advanced level products , outstanding value for money , by users of all ages .
2014年7月9日星期三
titanium alloy plate Transient stability of domestic titanium City recently
Chinese titanium sponge titanium temporarily stable overall market decline in value
Transient stability of domestic titanium City recently . International Titanium seeds, ilmenite European market demand continues to slump , weak turnover , while the North American market is relatively stable ilmenite , the U.S. and titanium alloy plate Canadian producers have said that at present , ilmenite trading activity is relatively stable, market supply and demand balance , there is not much changes , the current price is relatively strong, think short term, it will not be much fluctuation .
Domestic titanium seeds, titanium sponge recent decline in value caused widespread concern of market participants . Currently , the price of titanium sponge has been way down, 0 titanium sponge by last month 's price 65000-70000 yuan / ton , has been falling now 62000-64000 yuan / ton, the market reflects the business and even now traded titanium sponge in fact, the price is lower than the current price , 0 titanium sponge in the market at 60,000 , 60,000 or even less than the price could get arrived.
However, according to understand that the titanium sponge prices have dropped a lot, because of the bearish outlook , buyers are currently low market inquiry , but manufacturers insist on quoted market prices remain unchanged , at present , the domestic part of the titanium sponge manufacturers adhere to market price 0 65,000 yuan / ton , a market price of 64,000 yuan / ton, but the market traded market prices have declined , although , at present , the mainstream transaction prices have fallen to 0 62,000 yuan / ton , about a 60,000 yuan / ton.
The market outlook , there are manufacturers that titanium rod stock titanium tetrachloride , titanium tetrachloride possibility outlook fell sharply small. Because the market oversupply situation has improved , the market supply is not much, the price would no longer fall down .
Bottomed titanium tetrachloride , titanium sponge still not keep up with market demand , according to the manufacturers , the current decline in the price of titanium sponge , or keep up with demand for its market , buyers inquiry prices are low, manufacturers profit is limited, the price is too low, can not hold stocks , the market volume is also not much of titanium sponge manufacturers are engaged in a tug of war with the market , and with the arrival of the end of titanium sponge market demand continues to cool , and manufacturers need capital returns , reduce inventory , market price or to compromise , come down .
Ilmenite current situation is relatively stable, Shanghai spot aluminum price of 16100-16140 yuan / ton, was up 80 yuan , titanium tube stock China also reported up through the spot price of aluminum , ferro-titanium raw material prices are currently strong, though still insufficient market demand , but by the cost support, the market is still relatively stable, the recent market prices would not be a substantial adjustment , will remain stable.
And the recent poor weather conditions , the domestic titanium round bar ore market tensions have emerged , Panzhihua regional market demand, prices will strongly manufacturers , market participants have predicted the subsequent market prices will rise , but the short term , due to the recent market transactions downstream titanium dioxide not very good, there is a certain decline in market confidence , yet the opportunity to raise prices , titanium ore market will stabilize over time.
2014年7月7日星期一
titanium bar stockist Metallurgical Industry Classification
Metal Category
Metallurgical Industry Classification: Ferrous metals: iron, chromium, manganese and three kinds of non-ferrous metals: aluminum, magnesium, potassium, sodium, calcium, strontium, barium, copper, lead, zinc, tin, cobalt, titanium bar stockist nickel, antimony, mercury, cadmium, bismuth, gold, silver, platinum, ruthenium, rhodium, palladium, osmium, iridium, beryllium, lithium, rubidium, cesium, titanium, zirconium, hafnium, vanadium, niobium, tantalum, tungsten, molybdenum, gallium, indium, thallium, germanium, rhenium, lanthanum, cerium, praseodymium, neodymium, samarium, europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, lutetium, scandium, yttrium,
Common metals: such as iron, aluminum, copper, zinc and other metals: such as zirconium, hafnium, niobium, and tantalum;
1 light metal. Density less than 4500 kg / m³, such as aluminum, magnesium, potassium, sodium, calcium, strontium, and barium.
2. Heavy metals. Density greater than 4500 kg / m 3, such as copper, nickel, cobalt, lead, zinc, tin, antimony, bismuth, cadmium, mercury and the like.
3. Precious metals. Expensive than the plate titanium commonly used metal prices, low crustal abundance, purification difficulties, such as gold, silver and platinum group metals.
4 non-metallic elements. Properties at between metal and nonmetal such as silicon, selenium, tellurium, arsenic, boron, and the like.
5 rare. Including rare light metals such as lithium, rubidium, cesium, etc.;
6 rare refractory metals such as titanium, zirconium, molybdenum, tungsten, etc.;
7 dispersed rare metals such as gallium, indium, germanium, and thallium;
8 rare earth metals, such as scandium, yttrium, a lanthanide metal;
9. Radioactive metals, such as radium, titanium bar stock francium, polonium and actinides uranium and thorium.
The ductility of the metal is preferably gold (Au), good electrical conductivity at room temperature followed by silver (Ag), copper (Cu), aluminum (Al) and the like;
2014年7月5日星期六
titanium round bar cast titanium alloy plates smaller
Casting and mechanical properties of titanium plate deformation difference
The mechanical properties are usually cast titanium plates titanium round bar are below the performance of similar titanium plate deformation, especially in the plastic show more respect for the highlight, which is mainly due to the results of casting and casting defects organizational constraints, cast titanium alloy plates smaller than the other properties of the cast alloy drops.
For example, the yield strength titanium alloy casting fell only 13%, titanium wire manufacturers while 60% of the small decline in aluminum, steel declined by 25 percent, cast nickel-based alloys decreased by 17%, which illustrate the performance characteristics and deformation of cast titanium with titanium rivaling negative energy characteristics, and in some ways even more than the deformation titanium round bar properties of titanium, especially in fatigue performance.
订阅:
博文 (Atom)