1: Chemical composition of titanium and titanium bar should be consistent with GB / T 3620.1, provisions,titanium plate suppliers takes repeated experience, the chemical composition tolerances shall comply with the provisions of GB / T 3620.2's.
2: Thermal processing of rod diameter or side length and tolerances shall comply with the provisions of Table A of.
3: After thermal processing by car (mill) light bar and cold-rolled, cold drawn rod diameter tolerances surgical implant titanium shall comply with the provisions of Table II.
4: After thermal processing by car (mill) roundness light bars should not half its size tolerance.
5: Do not cut lengths processing state bar of 300-6000mm, annealed state bar is not definite length of 300-2000mm,titanium foil for sale length or double length should not cut lengths within the scope of the cut length tolerance of + 20mm. ; double length of the incision should be included in the amount of bars, each volume is 5mm incision length or double length should be specified in the contract.
没有评论:
发表评论